|
Home & Garden
>>>
Tools & Home Improvement
>>>
Electrical & Solar
|
8640 WATT GRID CONNECTED SOLAR SYSTEM
8640 WATT SOLAR POWERED SYSTEM FOR YOUR BUILDING!
| Start Price |
USD 58,500.00 |
| Current Price |
USD 58,500.00 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Thursday, August 21, 2008 |
| End Time |
Sunday, August 31, 2008 |
| Location |
Miami, Florida |
|
See more about '8640 WATT GRID CONNECTED SOLAR SYSTEM'
|
Description
8640 WATT GRID CONNECTED SOLAR SYSTEM Description: You are bidding on a 8640 Watt Grid Connected Solar System (UPSUI8640) complete with Emergency Battery Backup. THIS SYSTEM USES TWO INVERTERS AND CAN BE USED FOR 120/240V OPERATION. THE GRID CONNECTED ADVANTAGE There are basically 2 types of PV systems—stand-alone and grid-connected. Stand-alone systems operate independently of a utility grid and are normally used where no grid connection is possible, such as in remote areas or for portable highway signs, etc. Some stand-alone systems produce only DC power. Other stand-alone systems are designed to produce AC power. Grid-connected systems nearly always convert the DC power produced by the sun into AC power. The conversion from DC to AC takes place in an INVERTER. There are many types of inverters for a wide range of applications. Prior to 2002, stand-alone PV systems were the most common, but since 2002, more PV generation has been attributed to grid-connected systems than to stand-alone systems. One reason for this transition is that fully-interactive, grid-connected, systems optimize the use of PV electricity. The reason for this is that when the grid is available for a fully interactive grid-connected PV system, none of the energy generated by the PV system is wasted. Any electricity generated by the PV system that is not used on site is sold back to the utility for someone else to use. In a stand-alone system, if the electricity produced is not used on site, it is wasted. The Sun Electronics UPSUI series of Integrated PV Systems are all based upon battery backup fully utility interactive operation. They were designed especially for those in hurricane-prone zones who would prefer to have the sun provide them with electricity rather than having to refuel a constantly-running fossil fuel generator. The array mounting systems for the UPSUI systems have all been engineered to withstand 150 mph winds. Keep in mind that a fossil fuel generator CAN NEVER PAY FOR ITSELF, since it is only run when the utility is down. On the other hand, a utility interactive PV system will produce electricity every day over its lifetime, which can be expected to exceed 25 years. The PV modules in all of the UPSUI systems come with 25-year warranties. Depending upon the rebates or tax incentives available, the UPSUI systems will pay for themselves before their lifetime is over. This UPSUI system was Designed exclusively for Sun Electronics by Dr. Roger Messenger. This system comes complete with the following parts: Item Qty Description 1 48 Evergreen Solar ES-180 Modules (180W each) 2 3 Package UV resistant wire ties 3 48 Lay-In Ground Lugs with SS set screws and mounting hardware 4 1 Module Mounting Rail Set (See details for region) 5 1 Tube 50-year Weather Sealant 6 8 6x6x4-inch PVC W/P Junction Box 7 8 5-pole & one 4-pole UL-listed terminal strip for JB 8 # Cord connectors for module leads (QTY, Length, PRICE NOT LIST VARIES ON JON) 9 2 Outback PSPV Combiner Box with 1 negative bus 10 16 1P 15A dc breakers for PSPV 11 4 DC Surge Arrestor 12 4 Xantrex XW-60 MPPT Charge Controller 13 2 Xantrex XW6048 Inverter with Grid Tie Interface 14 1 2P60A AC Breaker 15 1 Set of AC in(2), AC out(2), neutral & gnd bus 16 1 Set of 4 1P15A & 4 1P20A AC Breakers 17 1 60A visible, lockable, load break W/P Disconnect 18 8 Fullriver FR4D 12 volt 210 Amp Hour sealed AGM Batteries 19 1 Set 2/0 battery cables (2 6-ft & 7 short) 20 1 XW Distribution Panel 21 4 CD 60 DC, DC Disconnect breakers This drawing shows the major components of the 8640 Watt Grid Connected System. Wire and misc. components are not shown but are depicted in the parts list We supply Turnkey Installation of any system and that they can view our own 25 KW system at 511 N.E. 15th St. Sun Electronics Store in Miami This is code compliant UPSUI engineered system is for the exclusive use of Sun Electronics customers. Any infringement on these systems without the written permission of Sun Electronics Int., Inc. or Dr. Roger Messenger is not allowed. Installation documentation is not available separately. For the Sun UPSUI Dealer/Installer Agreement, contact John Kimball at 305-710-9645. This system will come with 48 Evergreen ES 180 Modules.180 Watt Each • Best-in-class performance ratings proven by field installations • Get up to 104% of rated power with a guaranteed minimum of 98% <!- · Highest Wind Loading 80 LBS per sq ft. This system comes with a Xantrex XW6048 Inverter with Grid Tie Interface. The XW6048 offers many programmable features including automatic generator start and stop, and automatic load sensing. Its built-in, fully automatic, three-stage battery charger is designed to bring maximum charge to batteries, while using minimum generator run time and fuel. Manufacturers’ Documents Included in this System Manual Evergreen Solar ES-180 PV Module Data Sheets Unirac Solar Mount Installation Instructions and Code Compliant Planning and Assembly Outback PSPV Combiner Box Xantrex XW-60 MPPT Charge Controller Instruction and Installation Manual Xantrex XW6048 Inverter and GTI Instruction and Installation Manuals Concorde PVX-2240T Battery Data Sheets We are so confident in our systems we use them to power our own store front!
Place a Bid!
|
|
|
Search
Categories
More related categories
 |
[home] [sitemap]
|